Yokogawa EXA DC402 Dual-Channel Conductivity Analyzer - Manual (Page 68)

IM 12D08E02-01E
Appendix 10-5
FUNCTION SETTING DEFAULTS USER SETTINGS
User Interface
50
*RET 1 on
51 *MODE 0 off
52 *PASS 0.0.0 all off
53 *Err.1.1/1.2 1 hard fail
*Err.5.1/5.2 1 hard fail
*Err.6.1/6.2 1 hard fail
*Err.7.1/7.2 1 hard fail
*Err.8.1/8.2 1 hard fail
*Err.13.1/13.2 0 soft fail
*Err.22 0 soft fail
54 *E5.LIM1 25 mS/cm
0.04 kΩ•cm
*E6.LIM1 1 µS/cm
1 MΩ•cm
*E5.LIM2 25 mS/cm
0.04 kΩ•cm
*E6.LIM2 1 µS/cm
1 MΩ•cm
55 *% 0.0 Both off
*%1
*0%
*100%
*%2
*0%
*100%
56 *DISP 0 Auto ranging (SC)
(2) (xx.xx MΩ•cm) (RES)
57 *USP 0.0 Both disabled
58 *CALC 5 SC1
Communication
61
*HOUR
General
70
*LOAD reset defaults
Test and setup mode
80
*TEST