Yokogawa EJX118A User Manual

Page 54

<8. General Specifications>

8-12

IM 01C25H01-01E

*1:

See table 8.3 ‘Gasket contact surface’ on page 8-4.

*2:

Even in case where fill fluid code D (fluorinated oil) is selected, if degrease cleansing treatment or both degrease cleansing and

dehydrating treatment for the wetted parts is required, specify option code K1 or K5.

*3:

The specified capillary length includes the extension length (X2) and the flange thickness (t).

*4:

Forged version of the material may be used.

*5: The upper ambient temperature limit is 50°C (122°F) when specifying process connection size code 3 (3-inch).

The “#” marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of 316 SST

material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.