Proface PS4800 - 19 Panel PC" - Manual (Page 88)

PS-4000B Series User Manual
88
Exit
BIOS default settings
The CMOS profile switches, located on the front side of the unit near the LEDs, are
used to load pre-defined BIOS profile settings, which are based on the position of
the switches.
The switch positions at delivery represents the optimum BIOS default values and
should not be changed.
Main Advanced Boot Security Power Exit
Exit Options Exit system setup
after saving the
changes.
Discard Changes and Exit
d e s u e b n a c y e k 0 1 F s e g n a h C d r a c s i D
for this operation.
Load CMOS Defaults
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
Save Changes and Exit
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS setting Description Setting options Effect
Save Changes and Exit Displays a confirmation message box.
On confirming you want to save changes
to the BIOS settings, saves the new
settings to CMOS, and restarts the
system..
OK / Cancel -
Discard Changes and
Exit Exits the BIOS settings without making
any changes, and restarts the system. OK / Cancel -
Discard Changes Restores the previously saved BIOS
settings and discards any changes that
were made during the current session. OK / Cancel -
Load CMOS Defaults Loads the CMOS default values, defined
by the CMOS profile switch settings. This
command loads CMOS default values for
all BIOS configurations. OK / Cancel -