Proface PS4800 - 19 Panel PC" - Manual (Page 18)

PS-4000B Series User Manual
18
Certifications and Standards
Agency Certifications
Pro-face submitted this product for independent testing and qualification by third-
party agencies. These agencies have certified this product as meeting the following
standards.
z Underwriters Laboratories Inc.,UL 508 and CSA C22.2 N
°142, Industrial Control
Equipment
z Underwriters Laboratories Inc.,ANSI/ISA 12.12.01 and CSA C22.2 N
°213,
Electrical Equipment for Use in Class I, Division 2 Hazardous (Classified)
Locations
z GOST certified
z ATEX Category 3 Zone 22 certification
z Germanischer Lloyde(GL) Type approval
For information on certifications and standards, such as certified models and
certificates, see the following or product markings.
http://www.pro-face.com/worldwide.html
Compliance Standards
Pro-face tested this product for compliance with the following compulsory standards.
United States:
z Federal Communications Commission, FCC Part 15
Europe: CE
z Directive 2006/95/EC (Low Voltage)
Directive 2004/108/EC (EMC)
z Programmable Controllers: EN 61131-2 (Ed 3)
z EMI: EN55011 (Group 1, Class A), EN 61000-6-4
z EMS: EN 61000-6-2
z Directive 94/9/EC (ATEX)
Australia:
z Standard AS/NZS CISPR11 (C-Tick)
Qualification Standards
Pro-face voluntarily tested this product to additional standards. The additional tests
performed, and the standards under which the tests were conducted, are specifically
identified in Environmental Characteristics (see page 46).
Hazardous Substances
This product is compliant with:
z WEEE, Directive 2002/96/EC
z RoHS, Directive 2002/95/EC
z RoHS China, Standard SJ/T 11363-2006
End of Life (WEEE)
The product contains electronic boards. It must be disposed of in specific treatment
channels. The product contains cells and/or storage batteries which must be
collected and processed separately, when they have run out and on product end of
life.