Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 2)

2
Corresponding Units
General Specifications
„ General Specifications
„ Electrical Specifications
„ Environmental Specifications
„ External Specifications
Model Conditions Remarks
GP4000 Series
GP3000 Series
ST3000 Series
LT3000 Series A project file of GP-Pro EX
Ver1.10 or higher is trans-
ferred in advance.(Transfer
Tool's version, as well.)
For the detailed information
on the corresponding units,
refer to the hardware man-
ual of each unit or Pro-face
Home Page.
URL
http://www.proface.com/
I/F Type
External Device Serial I/F side: TIA/EIA-232C
Unit USB I/F side: USB Specification Rev1.1
Connector Type
Serial I/F side: D-sub 9 pin plug
USB I/F side: USB (Series A Plug)
Pow
e
r Supply
Rated Voltage DC5V (Powered from USB bus)
Allowable Voltage Drop DC4.75 to 5.25V
Power
Consumption
0.35W (max.)
P
h
ysi
c
a
l
Ambient Operating
Temperature
0 to +50
°C
Storage Temperature -20 to +60
°C
Ambient Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Storage Humidity
10 to 90% RH
(Wet bulb temperature: 39°C max. - no condensation.)
Dust 0.1mg/m
3
and below (non-conductive levels)
External
Dimensions
(Cable length)
0.5m (except connection parts)