Ramsey Winch H-800 W/AIR SHIFTER (TALBERT) User Manual
Page 2
Safety Precautions To Guard Against Possible Injury
A. Clutch must be totally engaged before starting the winch operation.
B. Do not disengage clutch under load.
C. Stay out from under and away from raised loads.
D. Stand clear of cable while pulling. Do not try to guide cable.
E. Do not exceed maximum line pull ratings shown in specifications.
F.
Do not use winch to lift, support, or otherwise transport people.
G. A minimum of 5 wraps of cable around the drum barrel is necessary to hold load. Cable set screw is not
designed to hold load.
Performance Specifications . . . . . . . . . . . . . .COVER
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . .2
Techniques of Operation . . . . . . . . . . . . . . . . . . . . .3
Winch Maintenance . . . . . . . . . . . . . . . . . . . . . . . .3
Winch Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Worm Brake Maintenance . . . . . . . . . . . . . . . . . . . .5
Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Re-assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Test for Proper Assembly . . . . . . . . . . . . . . . . . . .6
Checking Assembly Arrangement and Setting . . . .7
Adjustment of Clutch Air Shifter . . . . . . . . . . . . . . .7
Hydraulic System Requirements . . . . . . . . . . . . . . .8
Trouble Shooting Guide . . . . . . . . . . . . . . . . . . . . . .9
Instructions for Overhaul . . . . . . . . . . . . . . . . .10-16
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . .10-13
Re-assembly . . . . . . . . . . . . . . . . . . . . . . . . .13-16
Cable Tensioner Overhaul . . . . . . . . . . . . . . . . . .17
Dimensional Drawings . . . . . . . . . . . . . . . . . . .18-19
Parts List and Parts Drawing . . . . . . . . . . . . . .20-23
Warranty . . . . . . . . . . . . . . . . . . . . . . .BACK COVER
Contents
2