Ramsey Winch H-800 W/AIR SHIFTER (TALBERT) - Manual (Page 16)

16
(19)
Attach mounting angles (items #7 & 8) to winch assembly. Use capscrews (item #52 & #53) and lockwashers
(item #71). Tighten capscrews to 290 ft-lb. (393 Nm) each. Insert plug (item #87) into hole in bottom of gear
housing. Remove reducer and relief fitting on top of gear housing (items #79 & 86). Pour 3 -3/4 pints of E.P. 140 oil
into hole and replace plugs.
Check the action of the clutch by shifting and freespooling the winch drum several times. Operate the winch forward
and reverse and confirm that drum rotates.
7
8
71 53
87 71 52