Ramsey Winch H-800 W/AIR SHIFTER (TALBERT) - Manual

Ramsey Winch Company
OWNER'S MANUAL
MODEL H-800 SERIES
DOW-LOK ® EQUIPPED
INDUSTRIAL LOW-MOUNT WINCH
Congratulations
Ramsey Winches are designed and built to exacting specifications. Great care and skill go into every winch we
make. If the need should arise, warranty procedure is outlined on the back of your self-addressed postage paid war-
ranty card. Please read and fill out the enclosed warranty card and send it to Ramsey Winch Company. If you have
any problems with your winch, please follow instructions for prompt service on all warranty claims. Refer to back
page for limited warranty.
CAUTION: Read and understand this manual before installation and operation of winch. See
Safety Precautions.
Rated Line Pull (lbs.) …………………………………………………… 20,000
(Kg.) …………………………………………………… 9,060
Gear Reduction …………………………………………………………… 40:1
Worm RPM …………………….…………………………. 460 @ 30 GPM
Weight (without cable) ………………………………………. 485 lbs. (220 Kg)
1 2 3 4 5**
lbs. 20,000 16,600 14,200 12,400 11,000
Kg. 9,060 7,510 6430 5,610 4,980
ft. 35 75 125 180 240
m 10 22 38 54 72
FPM 18 22 26 29 33
MPM 5.4 6.6 7.9 8.8 10.0
Note: The rated line pulls shown are for the winch only. Consult wire
rope manufacturer for wire rope ratings.
** Fifth Layer does not conform to SAE J706
* These specifications are based on recommended wire rope of .63 inch (16
mm) dia. 6x19 extra improved plow steel or equivalent
LAYER OF CABLE
*Rated line pull
per layer
*Cable Capacity
*Line Speed