Ramsey Winch UNIV. WIRELESS REMOTE FOR FR. MOUNT WINCHES 251200-251202 - Manual

Warnings
1. T
HE
R
AMSEY
U
NIVERSAL
W
IRELESS
R
EMOTE IS DESIGNED FOR USE
ON FRONT MOUNT SELF
-
RECOVERY WINCHES ONLY
. T
HE REMOTE IS
NOT DESIGNED FOR AND SHOULD NOT BE USED ON WINCHES OR
HOISTS IN INDUSTRIAL APPLICATIONS
(
CAR HAULERS
/
CARRIERS
,
WRECKERS
,
CRANES
,
ETC
.)
OR FOR ANY OTHER REMOTE CON
-
TROLLED APPLICATION
.
2. W
HEN REELING IN CABLE UNDER NO LOAD
,
RELEASE THE REMOTE
BUTTON WHEN THE HOOK IS A MINIMUM OF
13
FT
(4
M
)
FROM THE
WINCH FAIRLEAD
. C
AREFULLY JOG THE REMOTE CONTROL BUTTON
UNTIL THE HOOK IS A MINIMUM OF
3
FT
(1
M
)
FROM THE FAIR
-
LEAD
.
U
NPLUG THE REMOTE ADAPTER OR TURN OFF THE BATTERY MASTER
SWITCH
. D
ISENGAGE THE CLUTCH AND FINISH SPOOLING IN CABLE
BY ROTATING THE DRUM BY HAND
.
3. When finished winching, turn transmitter off.
4. When winch is not in use, unplug remote adapter cable or turn bat-
tery master switch off.
5. Do not pressure wash or steam clean the receiver. This can damage
the receiver and adversely affect operation.
6. Refer to winch owner’s manual for all winch operating instructions
and warnings.
The following are general installation instructions. Actual
installation may vary depending on the vehicle.
INSTALLATION AND OPERATING
INSTRUCTIONS FOR RAMSEY
UNIVERSAL FRONT MOUNT
WIRELESS REMOTE CONTROL KITS
# 251200, 251201, & 251202