Ramsey Winch PATRIOT 12000_15000 SUN GEAR REPLACEMENT KIT 251275 - Manual

PATRIOT 15000/12000 OUTPUT SUN GEAR REPLACEMENT KIT
#251275
INSTALLATION INSTRUCTIONS
This kit allows the replacement of the output sun gear and output sun gear shaft used in Patriot 15000/12000 model
winches.
1. Unspool cable and remove from drum. Label electrical connec-
tions between vehicle battery and solenoid assembly and dis-
connect. It is not necessary to remove solenoid assembly from
winch.
2. Remove winch from mounting channel and place on work
bench, with motor end of winch down.
3. Loosen and remove tie bars. Set aside.
4. Lift Gear End Bearing Assembly from drum. Remove the output
sun gear and the thrust washers on either side of it and discard.
5. Set gear end bearing assembly down with gear end cover up.
913394-0105-A
RAMSEY WINCH COMPANY
PO BOX 581510 · TULSA OK 74158-1510
PHONE: (918) 438-2760 · FAX: (918) 438-6688
WWW.RAMSEY.COM
This washer will
be in the center of
the gear assembly
of the drum