Ramsey Winch RPH-30000T-117 - Manual (Page 3)

RAMSEY HYDRAULIC PLANETARY WINCH MODEL RPH 30000T-117
PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most efficient operation from your Ramsey Winch,
and safety procedures one needs to know before operating a Ramsey Winch. Do not operate this
winch until you have carefully read and understand the "WARNINGS" and "OPERATION" sections
of this manual.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great care and skill go into
every winch we make. If the need should arise, warranty procedure is outlined on the back of your
self-addressed postage paid warranty card. Please read and fill out the enclosed warranty card and
send it to Ramsey Winch Company. If you have any problems with our winch, please follow
instructions for prompt service on all warranty claims. Refer to back page for limited warranty.
SPECIFICATIONS* NOISE LEVEL 76 dB(A)
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer for wire rope ratings.
WARNINGS:
CLUTCH MUST BE TOTALLY ENGAGED BEFORE STARTING THE WINCHING OPERATION.
DO NOT START WINCH MOTOR BEFORE ENGAGING CLUTCH
DO NOT DISENGAGE CLUTCH UNDER LOAD.
STAY OUT FROM UNDER AND AWAY FROM RAISED LOADS.
STAND CLEAR OF CABLE WHILE PULLING. DO NOT TRY TO GUIDE CABLE.
DO NOT EXCEED MAXIMUM LINE PULL RATINGS SHOWN IN TABLE.
DO NOT USE WINCH TO LIFT, SUPPORT, OR OTHERWISE TRANSPORT PEOPLE.
A MINIMUM OF 5 WRAPS OF CABLE AROUND THE DRUM BARREL IS NECESSARY TO HOLD THE LOAD.
CABLE ANCHOR IS NOT DESIGNED TO HOLD LOAD.
1