Ramsey Winch RPH-35000 - Manual (Page 8)

3. Remove brake assembly screws (item #47) from brake (item #33a) to access (2)
mounting screws (item #19) attaching brake adapter plate (item #33d) to end bearing
(item #8). CAUTION: Brake is spring loaded by clutch spring and must be restrained
against end bearing as mounting screws are removed. Remove coupling (item #6) and
gasket (item #33e) from end bearing. Take note of mounting configuration for proper
mounting of parts during re-assembly.
4. Remove winch from upright mounting frame (item #2) by removing (8) capscrews (item
#16), (8) lockwashers (item #24) and (4) shoulder bolts (item #27). Pull motor end
bearing (item #8) from drum assembly (item #1).
9
7
47
33c
31
33a
33e
33d
33e
19
19
47
6