Ramsey Winch RPH-35000 User Manual
Page 3
RAMSEY HYDRAULIC PLANETARY WINCH MODEL RPH 35,000
PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most efficient operation from your Ramsey
Winch, and safety procedures one needs to know before operating a Ramsey Winch. Do not
operate this winch until you have carefully read and understand the "WARNINGS" and
"OPERATION" sections of this manual.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great care and skill go
into every winch we make. If the need should arise, warranty procedure is outlined on the
back of your self-addressed postage paid warranty card. Please read and fill out the enclosed
warranty card and send it to Ramsey Winch Company. If you have any problems with our
winch, please follow instructions for prompt service on all warranty claims. Refer to back
page for limited warranty.
SPECIFICATIONS*
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer
for wire rope ratings.
WARNINGS:
CLUTCH MUST BE TOTALLY ENGAGED BEFORE STARTING THE WINCHING OPERATION.
DO NOT START WINCH MOTOR BEFORE ENGAGING CLUTCH
DO NOT DISENGAGE CLUTCH UNDER LOAD.
STAY OUT FROM UNDER AND AWAY FROM RAISED LOADS.
STAND CLEAR OF CABLE WHILE PULLING. DO NOT TRY TO GUIDE CABLE.
DO NOT EXCEED MAXIMUM LINE PULL RATINGS SHOWN IN TABLE.
DO NOT USE WINCH TO LIFT, SUPPORT, OR OTHERWISE TRANSPORT PEOPLE.
A MINIMUM OF 5 WRAPS OF CABLE AROUND THE DRUM BARREL IS NECESSARY TO
HOLD THE LOAD.
CABLE ANCHOR IS NOT DESIGNED TO HOLD LOAD.
1
Rated Line Pull
(lbs.) ……………………………………………………
35,000
(Kg.) ……………………………………………………
15,909
Gear Reduction …………………………………………………………… 31.89:1
Weight (without cable) …………………………………………. 504 lbs. (229 Kg)
1
2
3
4
5
lbs.
35,000
28,600
24,200
21,000
18,500
Kg.
15,909
13,000
11000
9,545
8,390
ft.
25
60
105
155
200
m
7.6
18.3
32
47.2
60
FPM
15.4
18.6
21.1
23.5
28
MPM
4.7
5.7
6.4
7.2
8.5
* These specifications are based on recommended wire rope of .75 inch dia.
extra improved plow steel or equivalent
LAYER OF CABLE
*Rated line pull
per layer
*Cable Capacity
*Line Speed (at
15 GPM)