Ramsey Winch RCH 12K HOIST - Manual (Page 9)

8
HOIST OPERATION
The best way to get acquainted with how your hoist operates is to make test runs before you use it.
Plan your test in advance. Remember, you hear your hoist, as well as see it operate; learn to
recognize the sounds of a light steady pull, a heavy pull, and sounds caused by load jerking or
shifting. Gain confidence in operating your hoist and its use will become second nature with you.
The uneven spooling of cable while pulling a load is not a problem, unless there is a cable pileup
on one end of drum. If this happens reverse the hoist to relieve the load and move your anchor
point further to the center of the vehicle. After the job is done you can unspool and rewind for a
neat lay of the cable.
MAINTENANCE
The owner is to ensure proper inspection intervals, in compliance with ANSI B30.5, 5-2.3, and will review hoist
usage categories on a periodic basis. A Qualified Inspector should perform all maintenance and inspections.
•
For hoist in occasional use less than 10 hours per month it is recommended a pre-use inspection and
an annual 12 month inspection based on average use over a quarter.
•
For hoist in moderate use, more than 10 but less than 50 hours per month, it is recommended a pre-
use inspection, quarterly inspection, and an annual 12-month inspection based on average use over a
quarter.
•
For hoist in heavy use, more than 50 hours per month it is recommended a pre-use inspection, monthly
inspection, quarterly inspection, and an annual 12 months inspection.