Ramsey Winch RCH 12K HOIST - Manual (Page 16)

15
DISASSEMBLY OF INPUT CARRIER 19.35 RATIO
Carrier assemblies may be purchased as a complete assembly (see pg. 23) or parts may be
purchased individually (see parts list below). If purchasing individual parts, it will be necessary to
disassemble the input gear carrier as outlined below.
1. Carefully drive roll pin #65 into carrier pin #63 so that it is captured within carrier pin #63 but
not touching the opposite side of the input carrier #60.
2. Tap carrier pin #63 to remove it from the input carrier #60.
3. Slide the planet gear #51and the (2) thrust washers #54 from the carrier assembly #60.
Bearing #62 may then be pressed out.
4. Remove the roll pin #65 from the carrier pin #63.
64
62
61
63
60
65
64
ITEM # QTY PART # DESCRIPTION
60 1 317030 CARRIER-INPUT
61 3 334214 GEAR-INPUT-PLANET
62 3 402138 BEARING-NEEDEL
63 3 470119 PIN-INPUT
64 6 518069 WASHER-THRUST
65 3 470086 SPRING PIN-1/4 X 11/16 LG