Ramsey Winch RCH 12K HOIST - Manual (Page 18)

17
DISASSEMBLY OF INPUT CARRIER 41.62 RATIO
Carrier assemblies may be purchased as a complete assembly (see pg. 27) or parts may be
purchased individually (see parts list below). If purchasing individual parts, it will be necessary to
disassemble the input gear carrier as outlined below.
1. Carefully drive roll pin #71 into carrier pin #69 so that it is captured within carrier pin #69 but
not touching the opposite side of the input carrier #66.
2. Tap carrier pin #69 to remove it from the input carrier #66.
3. Slide the planet gear #67 and the (2) thrust washers #70 from the carrier assembly #66.
Bearing #68 may then be pressed out.
4. Remove the roll pin #71 from the carrier pin #69.
ITEM # QTY PART # DESCRIPTION
66 1 317031 MACHINED-CARRIER-INPUT RCH
67 3 334215 GEAR-INPUT-PLANET-RCH
68 3 402138 BEARING-NEEDEL RCH
69 3 470119 PIN-INPUT RCH
70 6 518069 WASHER-THRUST RCH
71 3 470121 SPRING PIN-1/4 X 7/8 LG
68
70
70
69
67
71
66