Lincoln Electric IM10038 POWER WAVE C300CE - Manual (Page 20)

A-10 INSTALLATION
POWER WAVE® C300 CE
A-10
TIG WELDING
(Figure A.7)
When TIG (GTAW) welding with the Power Wave
C300CE, a torch with an integral gas valve is
required.
SMAW WELDING
Most SMAW welding procedures use Electrode
Positive welding. For these applications, connect the
stick electrode holder to the positive (+) output stud
and connect the work clamp to the negative (-) output
stud.
Some SMAW welding procedures use Electrode
Negative Polarity. For these applications, connect the
stick electrode holder to the negative (-) output stud
and connect the work clamp to the positive (+) output
stud.
TO REMOTE CONTROL
RECEPTACLE
TO GAS SUPPLY
CONNECTION
GAS HOSE
TIG TORCH
WORK PIECE
POWER CABLE
WORK CLAMP
FOOT AMPTROL
(OPTIONAL)
TO POSITIVE
STUD (+)
TO NEGATIVE
STUD (-)
FIGURE A.7