1 anti-static precautions, 2 unpacking, 1 unpacking precautions – IEI Integration IDDUPS-636260А User Manual
Page 17
IDDUPS Series DC/DC Converter Module
Page 17
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
IDDUPS-6364120/636260 may result in permanent damage to the
IDDUPS-6364120/636260 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IDDUPS-6364120/636260. Dry climates are especially susceptible to ESD. It
is therefore critical that whenever the IDDUPS-6364120/636260, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the IDDUPS-6364120/636260,
place it on an antic-static pad. This reduces the possibility of ESD damaging
the IDDUPS-6364120/636260.
Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.
3.2 Unpacking
3.2.1 Unpacking Precautions
When the IDDUPS-6364120/636260 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section
193H193H193H196H
3.1
.
Make sure the packing box is facing upwards so the
IDDUPS-6364120/636260 does not fall out of the box.
Make sure all the components shown in Section
194H194H194H197H
3.3
are present.