4 wall mounting, Figure 2-19: arm mounting retention screw holes, Figure 2-20: wall mount – IEI Integration AFL-W19A_17D_W15A-N270 v3.00 User Manual

Page 41

AFL-W19A/17D/W15A-N270 Panel PC

Page 30

Figure 2-19: Arm Mounting Retention Screw Holes

Step 4:

Secure the flat panel PC to the interface pad by inserting four retention screws

through the bottom of the mounting arm interface pad and into the flat panel PC.

Step 0:

2.6.4 Wall Mounting

To mount the flat panel PC onto the wall, please follow the steps below.

Figure 2-20: Wall Mount

Step 1:

Select the location on the wall for the wall-mounting bracket.

Step 2:

Carefully mark the locations of the four brackets screw holes on the wall.