beautypg.com

4 memory module replacement, Emory, Odule – IEI Integration AFL-W19A_17D_W15A-N270 v3.00 User Manual

Page 101: Eplacement, Figure 4-1: back cover retention screws

background image

AFL-W19A/17D/W15A-N270 Panel PC

Page 90

Figure 4-1: Back Cover Retention Screws

4.4 Memory Module Replacement

The flat panel PC has a preinstalled memory module. If the memory module fails, take the

steps below to replace it.

Step 1:

Remove the back cover. See Section 4.3 above.

Step 2:

Locate the memory module on the motherboard of the flat panel PC

Step 3:

Remove the memory module by pulling both the spring retainer clips outward

from the socket.

Step 4:

Grasp the memory module by the edges and carefully pull it out of the socket.

Step 5:

Install the new memory module by inserting it at an angle, then pushing down

until the clips snap into place (Figure 4-2).

Step 0:

See also other documents in the category IEI Integration Computers: