beautypg.com

Figure 2-15: the rack/cabinet bracket, Figure 2-16: secure the rack/cabinet bracket – IEI Integration AFL-W19A_17D_W15A-N270 v3.00 User Manual

Page 38

background image

AFL-W19A/17D/W15A-N270 Panel PC

Page 27

Step 1:

Slide the rear of the AFL-W19A/17D/W15A-N270 flat panel PC through the

rack/cabinet bracket until the aluminum frame is flush against the front of the

bracket (Figure 2-15).

Figure 2-15: The Rack/Cabinet Bracket

Step 2:

Insert the rack mounting clamps into the pre-formed holes along the edges of

the flat panel PC, behind the ABS/PC plastic frame.

Step 3:

Tighten the screws that pass through the rack mounting clamps until the plastic

caps at the front of all the screws are firmly secured to the bracket

(Figure 2-16).

Figure 2-16: Secure the Rack/Cabinet Bracket

See also other documents in the category IEI Integration Computers: