IEI Integration AFL-W19A_17D_W15A-N270 v3.00 - Manual (Page 104)

AFL-W19A/17D/W15A-N270 Panel PC
Page 93
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the AFL-W19A/17D/W15A-N270.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
ƒ Follow the electrostatic precautions outlined below whenever the
AFL-W19A/17D/W15A-N270 is opened.
ƒ Make sure the power is turned off and the power cord is disconnected
whenever the AFL-W19A/17D/W15A-N270 is being installed, moved or
modified.
ƒ Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
ƒ Electric shocks can occur if the AFL-W19A/17D/W15A-N270 chassis is
opened when the AFL-W19A/17D/W15A-N270 is running.
ƒ Do not drop or insert any objects into the ventilation openings of the
AFL-W19A/17D/W15A-N270.
ƒ If considerable amounts of dust, water, or fluids enter the
AFL-W19A/17D/W15A-N270 , turn off the power supply immediately, unplug
the power cord, and contact the AFL-W19A/17D/W15A-N270 vendor.
ƒ DO NOT do the following:
o DO NOT drop the AFL-W19A/17D/W15A-N270 against a hard surface.
o DO NOT strike or exert excessive force onto the LCD panel.
o DO NOT touch any of the LCD panels with a sharp object
o DO NOT use the AFL-W19A/17D/W15A-N270 in a site where the ambient
temperature exceeds the rated temperature