1 msata replacement, Figure 5-1: system cover retention screws, Figure 5-2: msata module location – IEI Integration IDS-H61 User Manual

Page 52

IDS-H61 Digital Signage Player

Page 42

SO-DIMM

module

mSATA module (see Section

82..

5.2.1

)

5.2.1 mSATA Replacement

The IDS-H61 is preinstalled with one mSATA module. To replace the mSATA module,

please refer to the diagram and instructions below.

Step 1:

Remove the top cover by removing the four retention screws on both side panels

(two on each side). See Figure 5-1.

Figure 5-1: System Cover Retention Screws

Step 2:

Locate the mSATA module installed on the motherboard (Figure 5-2).

Figure 5-2: mSATA Module Location