IEI Integration IDS-H61 - Manual (Page 22)

IDS-H61 Digital Signage Player
Page 12
3.1 Installation Precautions
During installation, be aware of the precautions below:
ƒ Read the user manual: The user manual provides a complete description of
the IDS-H61, installation instructions and configuration options.
ƒ DANGER! Disconnect Power: Power to the IDS-H61 must be disconnected
during the installation process, or before any attempt is made to access the
rear panel. Electric shock and personal injury might occur if the rear panel of
the IDS-H61 is opened while the power cord is still connected to an electrical
outlet.
ƒ Qualified Personnel: The IDS-H61 must be installed and operated only by
trained and qualified personnel. Maintenance, upgrades, or repairs may only
be carried out by qualified personnel who are familiar with the associated
dangers.
ƒ Air Circulation: Make sure there is sufficient air circulation when installing the
IDS-H61. The IDS-H61’s cooling vents must not be obstructed by any objects.
Blocking the vents can cause overheating of the IDS-H61. Leave at least 5 cm
of clearance around the IDS-H61 to prevent overheating.
ƒ Grounding: The IDS-H61 should be properly grounded. The voltage feeds
must not be overloaded. Adjust the cabling and provide external overcharge
protection per the electrical values indicated on the label attached to the back
of the IDS-H61.
3.1.1 High Surface Temperature
WARNING:
Some surfaces of the equipment may become hot during operation.
The surface temperature may be up to several tens of degrees hotter
than the ambient temperature. Under these circumstances, the
equipment needs to be protected against accidental contact.
The equipment is intended for installation in a RESTRICTED ACCESS LOCATION.