IEI Integration TANK-720-Q67 - Manual (Page 81)

TANK-720 Em b e d d e d S ys te m
P a g e 69

IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11
 De vic e Mode [RS422/485]
Use the Device Mode option to set the serial port to normal or RS-422/485
communications..

Normal Sets the serial port mode to normal.

RS422/485 D EFAULT Enables serial port RS-422/485 support.
4.3.7.1.6 S e ria l P o rt 6 Co n fig u ra tio n
 Se ria l Port [Ena ble d]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Cha nge Se ttings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2E0h;
IRQ=10
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10

IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11

IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11