IEI Integration TANK-800-D525 v1.00 - Manual (Page 84)

TANK-800 Embedded System
Page 74
A.1 One Key Recovery Introduction
The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup
and recovery tool. The one key recovery provides quick and easy shortcuts for creating a
backup and reverting to that backup or for reverting to the factory default settings.
The IEI One Key Recovery tool menu is shown below.
Figure A-1: IEI One Key Recovery Tool Menu
Prior to using the IEI One Key Recovery tool (as shown in
74
Figure A-1 ) to backup or
restore Windows system, five setup procedures are required.
1. Hardware and BIOS setup (see Section
74
A.2.1 )
2. Create partitions (see Section
74
A.2.2 )
3. Install operating system, drivers and system applications (see Section
74
A.2.3 )
4. Build-up recovery partition (see Section
74
A.2.4 )
5. Create factory default image (see Section
74
A.2.5 )
After completing the five initial setup procedures as described above, users can access
the recovery tool by pressing <F3> while booting up the system. The detailed information
of each function is described in Section
74
A.4 .
NOTE:
The initial setup procedures for Linux system are described in
Section
74
A.3 .