IEI Integration TANK-800-D525 v1.00 - Manual (Page 60)

TANK-800 Embedded System
Page 50
ƒ Hyper-Threading: Indicates if the Intel Hyper-Threading Technology is
supported by the CPU.
Î Hyper-Threading [Enabled]
Use the Hyper-Threading BIOS option to enable or disable the Intel Hyper-Threading
Technology.
Î
Disabled Disables the Intel Hyper-Threading Technology.
Î
Enabled D EFAULT
Enables the Intel Hyper-Threading Technology.
4.3.3 IDE Configuration
Use the IDE Configuration menu (BIOS Menu 5) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
PATA Master
Not Present
PATA Slave Not Present
SATA Port0
Not Present
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
ATA/IDE Configuration
[Enhanced]
Configure SATA as [IDE]
Select ATA or IDE
Configuration.
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
+ - Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 5: IDE Configuration
Î ATA/IDE Configuration [Enhanced]
Use the ATA/IDE Configuration option to configure the ATA/IDE controller.
Î
Disabled Disables the on-board ATA/IDE controller.