IEI Integration TANK-800-D525 v1.00 - Manual (Page 35)

TANK-800 Embedded System
Page 25
3.7.1 ACC Mode Selection
The TANK-800 allows turning the ACC mode on or off. The setting can be made through
the ACC mode switch on the external peripheral interface panel as shown below.
Figure 3-10: ACC Mode Switch
3.7.2 AT/ATX Power Mode Selection
The TANK-800 supports AT and ATX power modes. The setting can be made through the
AT/ATX power mode switch on the external peripheral interface panel as shown below.
Figure 3-11: AT/ATX Power Mode Switch