10 intel® amt setup procedure, Ntel, Etup – IEI Integration KINO-QM770 User Manual

Page 93: Rocedure, Figure 4-22: usb connector, 10 intel, Amt setup procedure

KINO-QM770 Mini-ITX SBC

Page 77

Figure 4-22: USB Connector

4.10 Intel

AMT Setup Procedure

The KINO-QM770 is featured with the Intel® Active Management Technology (AMT). To

enable the Intel® AMT function, follow the steps below.

Step 1:

Make sure the DIMM1 socket is installed with one DDR3 SO-DIMM.

Step 2:

Connect an Ethernet cable to the RJ-45 connector labeled LAN1.

Step 3:

The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,

Step 4:

Properly install the Intel® Management Engine Components drivers from the

iAMT Driver & Utility directory in the driver CD. See Section 6.9.

Step 5:

Configure the Intel® Management Engine BIOS extension (MEBx). To get into

the Intel® MEBx settings, press after a single beep during boot-up

process. Enter the Intel® current ME password as it requires (the Intel® default

password is admin).

Step 0: