IEI Integration KINO-QM770 - Manual (Page 121)

KINO-QM770 Mini-ITX SBC
Page 105
Î VT-d [Enabled]
Use the VT-d option to enable or disable VT-d support.
Î
Disabled Disables VT-d support.
Î
Enabled D EFAULT Enables VT-d support.
5.4.2.1 Graphics Configuration
Use the Graphics Configuration menu to configure the video device connected to the
system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Graphics Configuration
IGFX VBIOS Version
2132
IGfx Frequency 350 MHz
Primary Display
[IGFX]
PEG0 – Gen X [Gen1]
DVMT Pre-Allocated
[128M]
DVMT Total Gfx Mem [MAX]
Primary IGFX Boot Display
[VBIOS Default]
LCD Panel Type [By Hardware]
Backlight Control [Inverted]
PID Current Jumper Setting 1024x768 24BIT
Select which of
IGFX/PEG/PCI Graphics
device should be Primary
Display Or select SG for
Switchable Gfx.
----------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 21: Graphics Configuration
Î Primary Display [IGFX]
Use the Primary Display option to select the primary graphics controller the system uses.
The following options are available:
ƒ IGFX Default
ƒ PEG