IEI Integration KINO-QM770 - Manual (Page 82)

KINO-QM770 Mini-ITX SBC
Page 66
Jumper Location: See Figure 4-11
Sets the external DVI-I connector as an analog CRT connector or a DVI connector.
Pin Description
Short 1-2 DVI (Default)
Short 2-3 CRT
Table 4-5: Display Mode Selection Jumper Settings
Figure 4-11: Display Mode Selection Jumper Location
4.6.5 Flash Descriptor Security Override
Jumper Label: J_FLASH1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-6
Jumper Location: See Figure 4-12
The Flash Descriptor Security Override jumper specifies whether to override the flash
descriptor.