IEI Integration KINO-QM770 - Manual (Page 71)

KINO-QM770 Mini-ITX SBC
Page 55
4.3 CPU, CPU Cooling Kit and SO-DIMM Installation
WARNING:
A CPU should never be turned on without the specified cooling kit
being installed. If the cooling kit (heat sink and fan) is not properly
installed and the system turned on, permanent damage to the CPU,
KINO-QM770 and other electronic components attached to the system
may be incurred. Running a CPU without a cooling kit may also result
in injury to the user.
The CPU, CPU cooling kit and DIMM are the most critical components of the
KINO-QM770. If one of these component is not installed the KINO-QM770 cannot run.
4.3.1 Socket G2 CPU Installation
WARNING:
CPUs are expensive and sensitive components. When installing the
CPU please be careful not to damage it in anyway. Make sure the CPU
is installed properly and ensure the correct cooling kit is properly
installed.
To install a socket G2 CPU onto the KINO-QM770, follow the steps below: