IEI Integration KINO-QM770 - Manual (Page 86)

KINO-QM770 Mini-ITX SBC
Page 70
Figure 4-15: PCIe Channel Mode Selection Jumper Location
4.7 Chassis Installation
4.7.1 Airflow
WARNING:
Airflow is critical for keeping components within recommended
operating termperatures. The chassis should have fans and vents as
necessary to keep things cool.
The KINO-QM770 must be installed in a chassis with ventilation holes on the sides
allowing airflow to travel through the heat sink surface. In a system with an individual
power supply unit, the cooling fan of a power supply can also help generate airflow
through the board surface.
4.7.2 Motherboard Installation
To install the KINO-QM770 motherboard into the chassis please refer to the reference
material that came with the chassis.