2 socket g2 cooling kit installation, Figure 4-2: lock the cpu socket retention screw – IEI Integration KINO-QM770 User Manual

Page 73

KINO-QM770 Mini-ITX SBC

Page 57

Step 5:

Align the CPU pins. Carefully align the CPU pins with the holes in the CPU

socket.

Step 6:

Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are

properly aligned, the CPU should slide into the CPU socket smoothly.

Step 7:

Lock the retention screw. Rotate the retention screw into the locked position.

Figure 4-2: Lock the CPU Socket Retention Screw

4.3.2 Socket G2 Cooling Kit Installation

An IEI Socket G2 CPU cooling kit can be purchased separately (See Chapter 2). The

cooling kit is comprised of a CPU heat sink and a cooling fan.

WARNING:

Do not wipe off (accidentally or otherwise) the pre-sprayed layer of

thermal paste on the bottom of the heat sink. The thermal paste

between the CPU and the heat sink is important for optimum heat

dissipation.

To install the cooling kit, please follow the steps below.