IEI Integration PICOe-HM650 - Manual (Page 59)

PICOe-HM650 Half-size PCIe CPU Card
Page 45
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
PICOe-HM650 may result in permanent damage to the PICOe-HM650
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PICOe-HM650. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the PICOe-HM650 or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the PICOe-HM650, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
PICOe-HM650.
ƒ Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.