2 usb device connection (single connector), Figure 4-16: lan connection – IEI Integration PCIE-Q670 v1.03 User Manual

Page 76

PCIE-Q670 PICMG 1.3 CPU Card

Page 61

Figure 4-16: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

4.6.2 USB Device Connection (Single Connector)

There are two external USB 2.0 connectors. Both connectors are perpendicular to the

PCIE-Q670 Series. To connect a USB 2.0 or USB 1.1 device, please follow the

instructions below.

Step 1:

Located the USB connectors. The locations of the USB connectors are shown

in Chapter 3

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the PCIE-Q670 Series. See Figure 4-17.