AVerMedia Technologies AVERDIGI EB5416DVD - Manual (Page 23)

17
2.1.3 Controlling PTZ Camera
Using remote control, user can easily control PTZ camera at local site. Before starting, please go to
OSD menu to enable PTZ control (see
3.1 Menu Function: PTZ Setup ).
2.1.3.1 To Enter the PTZ Mode
To control PTZ camera, user need to enter the PTZ mode first. Press button, and camera
channel number button ( 1 ~ ) that the selected channel will switch to PTZ mode in a full
screen display.
To exit PTZ mode, press . Also, the system will automatically exit PTZ mode when the idle
time is over 1 minute.
2.1.3.2 To Set Preset Position
User can set 16 preset positions for PTZ camera. Using + 1 to button to set the
preset position.
1. Press and camera channel number button ( 1 ~ ) to enter PTZ mode.
2. Using , , and to adjust the PTZ camera to the position that user
wants.
3. Press to save
4. To move the PTZ camera to preset position, just press the number button.