Warner Electric MCS2000-DRV2 - Manual (Page 17)

System Troubleshooting
Troubleshooting the MCS2000-DRV2 Dual
Channel/Dual Voltage Driver is fairly straight forward.
There are certain basic checks that can be made
using a digital DC meter. All readings taken on the
MCS2000-DRV2 will be either DC voltages or DC
currents. A meter sufficient to measure up to 100
VDC and 10 Amps DC will be suitable for taking any
of the measurements deemed necessary.
Additionally, the MCS2000-DRV2 offers a certain
amount of diagnostics built into the unit via the
“GREEN” and “RED” LED’s for troubleshooting
purposes.
As with any electronic device, care should be taken
when installing, wiring and commissioning the unit.
Failure to do so may damage or destroy the driver
and void the warranty.
Figure 6
LED Indicator Operations and Descriptions - Normal Conditions
Note: Each Channel “A” and “B” can be operated independently, so one channel can have one set of
indications while the second channel can have a completely different set of indications. This will be depend-
ent on how controller is set to operate the MCS2000-DRV2 Driver.
Warner Electric • 800-825-9050 P-2010-6 • 819-0524 17