Warner Electric Primary Brake Pin Drive Armature PB-825, PB-1000, PB-1225, PB-1525 Motor Brake and Spline Drive MB-825, MB-1000, MB-1225 Pin Drive - Manual (Page 15)

15 Warner Electric • 800-825-9050 P-208 • 819-0367
PB-1000 Brake–Normal Duty Drawing I-25586
How to Order:
1. Specify Bore Size for Item 1.
2. Specify Inside Mounted for Items 5A and 6A or
Outside Mounted for Items 5B and 6B.
3. Specify Voltage for Item 6A or 6B.
Example:
PB-1000 Brake per I-25586 -
90 Volt, Inside Mounted, 1" Bore
These units, when used in conjunction with the
correct Warner Electric conduit box, meet the
standards of UL508 and are listed under guide
card #NMTR, file #59164.
2
1
3
4
7
6B-1
6B
7
6A-1 6A
5A
5B
Item Description Part Number Qty.
1 Bushing* 1
1/2" to 2-1/2" Bore 180-0185 to 180-0217
2 Armature Hub 540-0313 1
3 Armature 5302-111-013 1
4 Autogap Accessory 5201-101-008 3
5A Mounting Accessory - I.M. 5321-101-001 1
5B Mounting Accessory - O.M. 5321-101-002 2
6A Magnet - Inside Mounted 1
6 Volt 5312-631-004
24 Volt 5312-631-005
90 Volt 5312-631-006
†90 Volt LK Facing 5312-631-001
6A-1 Terminal Accessory 5311-101-001 1
6B Magnet, Outside Mounted 1
6 Volt 5312-631-011
24 Volt 5312-631-013
90 Volt 5312-631-012
†90 Volt LK Facing 5312-631-002
6B-1 Terminal Accessory 5311-101-001 1
7 Conduit Box 5200-101-011 1
*See page 32 for specific part numbers. †Optional LK facing
available.