Vanguard CT-7000 S3 User Manual

Page 96

CT-7000 S3 USER’S MANUAL

REV 1

Type the record number to be deleted and press the

[ENTER]

key. If you do not

know the record number, you can first print a test record directory using the
instructions in section 3.4.3. The selected test record will be deleted and the
following screen will be displayed:

Press any key to continue. The screen shown at the beginning of step d will be
displayed again allowing you to delete additional records if desired. Press the

[STOP]

key to return to the "START-UP" menu.

2. ERASE ALL RECORDS

Press the

[2]

key (ERASE ALL RECORDS) if you would like to erase all the test

records stored in the USB Flash drive. The following screen will be displayed:

If you would like to abort the erase operation, press the

[STOP]

key. No records

will be erased from the USB Flash drive, and you will be returned to the "START-
UP" menu.

Press the

[ENTER]

key to continue with the erase operation. The following

screen will be displayed when all records have been deleted from the USB Flash
drive:

ERASE ALL THUMB DRIVE
RECORDS?

ARE YOU SURE?

"ENTER" TO CONTINUE.

THUMB DRIVE REC_000
ERASED!

ERASE THUMB DRIVE

REC_