Vanguard CT-7000 S3 - Manual (Page 92)

CT-7000 S3 USER’S MANUAL REV 1
87
3.4.7. Deleting Test Records from the Flash EEPROM
You can delete one or all test records stored in the CT-7000 S3’s Flash EEPROM. To delete test
records:
a. Start from the “START-UP” menu:
Press the
[3]
key (SAVE/RESTORE).
b. The following screen will be displayed:
Press the [4] key (ERASE SHOT).
c. The following screen will be displayed:
1. ERASE SHOT
Press the [1] key (ERASE SHOT) if you would like to erase a single shot from the
Flash EEPROM. The following screen will be displayed:
Using the keypad, type the test record number that you would like to erase. If you
do not know the record number, you can first print a test record directory using the
instructions in section 3.4.2. Press the
[ENTER] key.
ENTER SHOT NUMBER
TO BE ERASED
1. ERASE SINGLE SHOT
2. ERASE ALL SHOTS!
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
1. TIME BREAKER 09/17/13
2. GET RESULTS 10:10:10
3. SAVE/RESTORE
4. SETUP
5. DIAGNOSTICS