Vanguard CT-7000 S3 - Manual (Page 121)

REV 1 CT-7000 S3 USER’S MANUAL
116
d. The following screen will be displayed:
Press the
[1]
key to print every data point. The data points will be printed and you will
be returned to the “START-UP” menu.
Press the
[2]
key to print every 5 data points. The data points will be printed and you
will be returned to the “START-UP” menu.
A partial data points printout is shown in Figure 37.
WARNING
Due to the large number of data points, even selecting the “Every 5 Points”
option will produce a VERY long report printout!
Figure 37. Partial Data Points Printout
1. EVERY POINT
2. EVERY 5 POINTS