Vanguard CT-7000 S3 User Manual

Page 88

CT-7000 S3 USER’S MANUAL

REV 1

3.4.5. Restoring a Test Record from a USB Flash Drive

You can restore a test record from a USB Flash drive to the CT-7000 S3's working memory using
the steps below:

a. Make sure the USB Flash drive containing the test record(s) is inserted in the CT-7000

S3's USB Flash drive port ("USB MEM" port). Then start from the "START-UP" menu:

Press the

[3]

key (SAVE/RESTORE).

b. The following screen will be displayed:

Press the

[2]

key (RESTORE SHOT).

NOTE

Option 5 (COPY TO THUMB DRIVE) will be displayed only if a USB Flash drive is
connected to the unit.

c. The following screen will be displayed:

Press the

[2]

key (THUMB DRIVE).

d. The following screen will be displayed:

RESTORE THUMB DRIVE

REC_

1. INTERNAL STORAGE
2. THUMB DRIVE

1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE

1. TIME BREAKER 09/17/13
2. GET RESULTS 10:10:10
3. SAVE/RESTORE
4. SETUP
5. DIAGNOSTICS