Vanguard CT-7000 S3 - Manual (Page 28)

CT-7000 S3 USER’S MANUAL REV 1
23
h. The following screen will be displayed:
Type the circuit breaker serial number using the keypad and then press the
[ENTER]
key.
i. The following screen will be displayed:
Type the operator’s name using the keypad and then press the [ENTER] key. All
header information will be saved, and you will be returned to the “START-UP” menu.
OPERATOR:
_
↑↓
to position
"ENTER" TO ACCEPT
SERIAL NUMBER:
_
↑↓
to position
"ENTER" TO ACCEPT