Vanguard CT-7000 S3 User Manual

Page 73

REV 1 CT-7000 S3 USER’S MANUAL

Press the

[2]

key (DISPLAY RESULTS) to display the test results on the unit’s LCD

screen. The following screen will be displayed:

Press the

[]

and

[]

keys to scroll through the test results. Press the

[STOP]

key to return to the “START-UP” menu.

2. PLOT FULL CHART

Press the

[2]

key (PLOT FULL CHART) to print the tabulated results WITH the full

graph of the results. You will be returned to the “START-UP” menu when printing is
finished. A typical test result graph is shown in Figure 23.

3. PLOT EXPANSION

Press the

[3]

key (PLOT EXPANSION) to print the tabulated results along with a time

expansion plot of the test results. The following screen will be displayed:

You will be asked to enter the start point for the expansion. The start point can be
selected in 100 millisecond increments by typing the first digit of the starting time.
For example, to select 500ms, simply press the

[5]

key. The screen will be updated

as shown:

Press the

[ENTER]

key.

The following screen will be displayed:

EXPANSION TO:

EXPANSION FROM:
500MS

"ENTER" TO CONFIRM

EXPANSION FROM:

UP / DWN ARROWS TO
SCROLL RESULTS...

"STOP" TO EXIT...