Vanguard CT-7000 S3 User Manual

Page 61

REV 1 CT-7000 S3 USER’S MANUAL

g. The following screen will be displayed:

1. Contact #1 CLOSE

Press the

[1]

key if you would like the open operation to be initiated after contact

channel #1 is closed. Continue to step h.

2. Set DELAY

Press the

[2]

key to set a delay time between the CLOSE command and the OPEN

command. The following screen will be displayed:

Type the delay time using the keypad and then press the

[ENTER]

key. Continue

to step h.

3. No DELAY

Press the

[3]

key to initiate the CLOSE and OPEN commands simultaneously.

Continue to step g.

h. The following screen will be displayed:

Hold down the

[ARM]

switch and press the

[START]

key.

HOLD "ARM" UNTIL
TEsT COMPLETES.

"START" TO BEGIN
"STOP" TO ABORT

C-O DELAY IN MS:

(10 - 500)

MSEC

"ENTER" WHEN DONE

C-O SECOND TRIGGER:

1. CONTACT #1 CLOSE
2. SET DELAY
3. NO DELAY