Vanguard CT-6500 S2 - Manual (Page 71)

CT-6500 Series 2 Operating Instructions
70
Problems Suggestion
9. How does one review the current analysis setting? - Go to SETUP (Press key #3).
- Select Analysis (Press key #1).
- Select PRINT SETTING (Press key #3). The CT-6500
will print out the current AP1 & AP2 settings.
10. The CT-6500 will not communicate with the PC. - Make sure your PC communication port is selected
correctly.
- Make sure your serial or USB cable is connected
properly.
11. Turn on Automatic Print Results mode. - See section 9.17.
12. Where can one get some thermal paper? - Call the factory at 909-923-9390 or BG Instruments at
509-893-9881. The CT-6500 uses TP-4 thermal paper.
- In case of an emergency, thermal paper can be
purchased at Radio Shack. Radio Shack carries 4.25
inch wide thermal paper. It is not the right size but it will
work.
13. How does one darken or lighten the LCD? - Press and hold the “
↑ PAPER LCD” key will darken the
LCD.
- Press and hold the “
↓ PAPER LCD” key will lighten the
LCD.
14. How does one move thermal paper forward or
backward? - Press and release the “
↑ PAPER LCD” key, the
thermal paper will advance.
- Press and release the “
↓ PAPER LCD” key, the
thermal paper will retract.