Vanguard CT-6500 S2 - Manual (Page 42)

CT-6500 Series 2 Operating Instructions
41
9.4 Save Timing Test Records in the EEPROM
Use the steps in Table 9.0 to save a timing test record in the FLASH EEPROM.
Table 9.0 Save Timing Test Record In EEPROM
STEP OPERATION ACTION DISPLAY
1 SELECT SETUP MENU. PRESS #3 KEY. 1.ANALYSIS POINTS
2.MEASUREMENT UNITS
3.SAVE / RESTORE
4.NEXT PAGE
2 SELECT SAVE MENU. PRESS #3 KEY. 1.SAVE SHOT
2.RECALL SHOT
3.SHOT DIRECTORY
4.ERASE SHOT
3 SELECT SAVE SHOT. PRESS #1 KEY. SAVE SHOT # 002
TEST: CLOSE
DATE: 05/23/07 12:36
"ENTER" TO PROCEED
4 CONFIRM SAVING SHOT. PRESS THE
"ENTER" KEY.
SAVE IN PROCESS
PLEASE WAIT
5 OBSERVE SHOT BEING SAVED. NONE. SHOT SAVE
6 RETURN TO MAIN MENU. PRESS ANY KEY.
1.RUN TEST 06/10/07
2.GET RESULTS 20:10:01
3.SETUP
4.DIAGNOSTIC
NOTE
Timing test record storage capability varies, depending upon the size of the records.
The CT-6500 will assign an identification number for each of the records stored in
the EEPROM.
Shot ID #2 was assigned in the example above.