Vanguard CT-6500 S2 - Manual (Page 47)

CT-6500 Series 2 Operating Instructions
46
9.8 Test Record Description
The CT-6500 has the capability for users to enter the breaker and other identification
information. The data usually consists of the name of the company, station, circuit and
manufacturer. Other information could be the breaker's model, serial number and the operator's
name. The identification data will print out in the header section of the tabulated report.
If the user saves the timing shot, the identification data will also be saved with the timing shot,
along with the time and date.
The user can input letters of the alphabet by utilizing the alphanumeric keys. To select the
letter "A," the user will need to press key numbered “2,” twice. To select the letter "C," the user
will need to press the key numbered “2,” four times and so on.
To move the cursor forward, press the “UP ARROW” key. To move the cursor backwards, use
the “DOWN ARROW” key. Use the “CLEAR” key to enter a space.
Table 13.0 Entering Test Record Identification Header
STEP OPERATION ACTION DISPLAY
1 SELECT SET UP MENU. PRESS #3 KEY. 1.ANALYSIS POINTS
2.MEASUREMENT UNIT
3.SAVE / RESTORE
4.NEXT PAGE
2 SELECT NEXT PAGE. PRESS # 4 KEY. 1.SHOT DESCRIPTION
2.NUMBER OF CHANNELS
3.SET DATE & TIME
4.SET PRINT MODE
3 SELECT SHOT DESCRIPTION. PRESS # 1 KEY. COMPANY:
XXXXXX
↑/↓ TO POSITION
"ENTER" TO ACCEPT
4 ENTER COMPANY NAME. PRESS KEYS 0-9 AND
PRESS "ENTER" KEY.
STATION
XXXXXX
↑/↓ TO POSITION
"ENTER" TO ACCEPT
5 ENTER STATION NAME. PRESS KEYS 0-9 AND
PRESS "ENTER" KEY.
CIRCUIT
XXXXXX
↑/↓ TO POSITION
"ENTER" TO ACCEPT
6 ENTER CIRCUIT NAME. PRESS KEYS 0-9 AND
PRESS "ENTER" KEY.
MANUFACTURER
XXXXXX
↑/↓ TO POSITION
"ENTER" TO ACCEPT
7 ENTER MANUFACTURER NAME. PRESS KEYS 0-9 AND
PRESS "ENTER" KEY.
BREAKER
XXXXXX
↑/↓ TO POSITION
"ENTER" TO ACCEPT