Vanguard CT-6500 S2 - Manual (Page 61)

CT-6500 Series 2 Operating Instructions
60
9.17 Automatic Print Setting
The CT-6500 can be set to print graphs and tabulated results automatically after each timing
shot. To turn on the “Auto Print Results” mode, follow the steps in Table 22.0.
Table 22.0 Automatic Print Setting
STEP OPERATION ACTION DISPLAY
1 SELECT SET UP MENU. PRESS # 3 KEY. 1. ANALYSIS POINT
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. NEXT PAGE
2 SELECT NEXT PAGE. PRESS # 4 KEY. 1. SHOT DESCRIPTION
2. NUMBER OF CHANNELS
3. SET DATE & TIME
4. NEXT PAGE
3 SELECT NEXT PAGE. PRESS #4 KEY. 1. SET PRINT MODE
2. SET 50/60 Hz
3 SELECT SET PRINT MODE. PRESS # 1 KEY. SET PRINT MODE
1. AUTOMATIC PRINT
2. BY REQUEST ONLY
4 SELECT “AUTOMATIC PRINT”. PRESS # 1 KEY. 1.RUN TEST 06/10/07
2.GET RESULTS 20:10:01
3.SETUP
4.DIAGNOSTIC
NOTE
Select print “BY REQUEST ONLY” to disable the “Automatic Print” mode.